This shows how your screen will look if you have a bad or damaged video card. The video clip also details how to take apart your computer and replace the video card.
Make sure to unplug you computer... and get the correct video card for your computer.
Installing crown molding usually requires two people. You need someone to hold your tap measure and someone to help you install crown molding. And make sure you have a study ladder and a sharp blade in your miter saw.
How to Video to prepare for painting rooms in your house. Prep work is the most important part of any paint job. Repair any damage to the walls with sheet rock compound or caulk. Make sure you have a good painting drop cloth to protect the floor and other objects in the room. Proper Taping of trim and removing of electrical plates makes the painting look professional.
Always turn off the power before you begin to install a light fixture. Remember Black to Black wire, white to white wire. Most light fixtures will come with wire nuts. You may also put electrical tape around the wire nuts and onto the wire to secure the connection.
Preparation is the key to installing a hardwood floor. Make sure you measure the room for squareness and provide yourself with a square layout. Pull up any carpet tacks, staples or other objects in the subfloor. It helps to vacuum the room to make sure all debris is removed.
If you are installing a toilet after you added tile or hardwood floors (and raised the level of the floor) you may need an extra ring of bowl wax. It's always good to replace the bowl wax each time you remove a toilet. You also want to replace the water supply line and the "guts" of the toilet if you are re-setting the toilet after a remodel job.
You can rent more high tech equipment at your local home improvement store. The techniques for hanging drywall on the ceiling by yourself seen in the video are very useful.
Once you finish taping the joints, you need to apply two more coats of joint compound and sand between each to get a professional drywall finish. Use a 10" broad knife and dull the sharp corners of the knife with sand paper so they don't scratch the drywall. Leave a slightly higher center when applying the joint compound because you can easily sand this away.
 |
 |
 |
 |
 |
 |